AIM ARINC board not detected with MXIe in a PXI-1033 chassis

[Mmonterrat]

Hi,

I have a PXI-1033 chassis with NI PXI-6229 and AIM boards (ARINC 429 & AFDX) linked to a PC with MXIe.
Windows can't attribute enough ressources to this device (indicated in the devices manager) so I can't install drivers for my boards.
If I only put NI PXI-6229 in my chassis, all is OK.
If I only put AIM boards in my chassis, Windows doesn't boot.
I tried with a PXI-1036 chassis linked to my PC with MXI-4, all is running correctly (NI and AIM boards).

Is there anyone who detects a problem of compatibility between AIM boards and MXIe links, and what is the solution ?

Thanks for answers.

Matthieu

[Robert__R]

Mmonterrat,

Problems like this are quite often caused by the computer's BIOS.  Is there a BIOS update for your PC, and have you tried a different computer?

You can get more information here:  http://digital.ni.com/public.nsf/websearch/05B7131814A5DDA38625710F006BB098?OpenDocument

--

Robert

[Mmonterrat]

Robert,

thanks for your help.
I updated my bios but there is always the same problem. I also tried with 2 other PCs (the same model and another), but it's not better.
My PC is a DELL PRECISION 380. If Someone has the same and could try ...

Matthieu

[pierreR]

Please first look at : http://zone.ni.com/devzone/cda/tut/p/id/5022 to see the Desktop PC which have been tested with MXIe.

[pierreR]

Please verify that your AIM ARINC card supports MXIe. Due to material architecture some of them are not compatible with MXIe link. Please contact your AIM ARINC saler

[Mmonterrat]

I find a solution : I will replace my PXI-1033 MXIe chassis by PXI-1036 and MXI4 cards. I'm sure that it's OK.
Thanks to everybody.