I need dimensional drawings for p/n 779157-01

[theAntiLabView]

I need the manufacturer and part number, drawings, etc. for the Mating Connector for LVDS Custom-Load Boards, p/n 779157-01.

[Otis]

Hi Chris,

I measured my connector and it appears to be 4.1 cm long and 1 cm tall.

I hope this helps you out.

[ryanm]

Hi Chris,

I have attached the dimensional drawing for p/n 779157-01.  Please let me know if you need any dimensions that are not listed.

Thanks,

Ryan M.

Message Edited by ryanm on 08-28-2006 05:51 PM

[dukeA]

1) LVDS has 73 pin signal  + ground. I order the connector p/n 779157-01, found only 25 pins to mount on PCB.

2) how the pin is number on this connector from 1-  73.

Thanks for help

[ryanm]

The original drawing is generic, combining the Infiniband 1x, 2x, and 12x connectors into one image.  In order to avoid someone from accidently reading the wrong values, I reduced Table 3 to only show the values applicable to p/n 779157-01.  Looking at Table 3, you will notice m is 1 to 24 and n is 1 to 25.  Going back to the drawing, we have S(mx2), S(mx2-1), and G(n).  Applying the values from Table 3, we have 48 S pins and 25 G pins a total of 73 pins.  This should be the value you are expecting.  Sorry for the confusion.  Please let me know if you have any further questions.

Ryan 

[Jxbock]

Good afternoon -  We will be designing a board to connect to a NI 6589 via a SHB12-B12X cable. 

Could you send me the complete cad drawing for the connector so that our layout group can create the symbol?

Thanks!