I have problems building an installer when including either NI-SCOPE, NI-SWITCH or NI-FGEN under "Additional installers". This problem occured after upgrading to LV8.5.
The error message is as follows:
"
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'National Instruments Device Drivers - August 2007, Disk 2' from: G:\3000000\3000000 Technology&Products\Software\NI\Installers\LabVIEW 8.5\_SourceFiles\Device Drivers\DCD-Aug07-2\ to: C:\Documents and Settings\ofsjocor\Desktop\Test\Builds\
Copying distribution 'National Instruments Device Drivers - August 2007, Disk 3' from: G:\3000000\3000000 Technology&Products\Software\NI\Installers\LabVIEW 8.5\_SourceFiles\Device Drivers\DCD-Aug07-3\ to: C:\Documents and Settings\ofsjocor\Desktop\Test\Builds\
Copying distribution 'NI LabVIEW SignalExpress 2.5' from: G:\3000000\3000000 Technology&Products\Software\NI\Installers\LabVIEW 8.5\_SourceFiles\SignalExpress\ to: C:\Documents and Settings\ofsjocor\Desktop\Test\Builds\
Copying distribution 'National Instruments Device Drivers - August 2007, Disk 1' from: G:\3000000\3000000 Technology&Products\Software\NI\Installers\LabVIEW 8.5\_SourceFiles\Device Drivers\DCD-Aug07-1\ to: C:\Documents and Settings\ofsjocor\Desktop\Test\Builds\
Copying distribution 'NI LabVIEW 8.5' from: G:\3000000\3000000 Technology&Products\Software\NI\Installers\LabVIEW 8.5\ to: C:\Documents and Settings\ofsjocor\Desktop\Test\Builds\
**************
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the path specified.
*** End Error Report
**************
Done building deployment
"
Under "Details" it's written:
"Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
"
I've tried creating a very simple vi and build a new exe-file and installer, but the same happens as with my old project. The new project is attached here.
