Is there a way to flash my SCXI-1000 chassis?

[king10208]

I've got a SCXI-1000 (AC version) with 3 1102's and a 1163r in it, all with 1303s/1326.

While re-wiring a couple of things, a stray line brushed the case of the 1326. A brief spark ensued, and now I can't communicate with the chassis.

A thorough visual inspection reveals nothing, and I'm at a loss.

I _feel_ like the MUX is just confused or something, but I confess my degree is aero, not CS.

The chassis is cabled through a 1349 (also fine visually) back to my PCI-MIO-XE-10 on a Windows XP PC, fwiw.

The card self-tests fine in M&AE 4.50f0 but the chassis will auto-detect nothing and subsequently not submit itself to a verification.

 I'd appreciate any advice on how to procede from here.

thanks,

-dmk

[king10208]

An update:

Luckily, I've got three full SCXI DAQ systems running in my lab presently. One's a USB SCXI-1600-based system, and two are MIO-1102-based.

Through lots of swapping around, I've determined that all modules and chassis are fine, and the victim of the stray overvolt was the SCXI-1349 interface.

I feel fortunate that the least expensive component was the one damaged.

Thanks for the help that I am sure was coming,

-dmk