PCI-6221 to SCXI chassis setup in MAX as Traditional DAQ

[RobH]

I am installing a SCXI setup I purchased a few months ago.  In the past I used as PCI-6034E to a SCXI-1100 chassis with a 1100, 1124, and 1160 modules.  The sales rep recommended that I use the PCI-6221 as the DAQ board and I am having trouble in MAX in getting the virtual channels setup.  I am using Traditional virtual channels (Vendor who generated software has a calibration module that must use this).  When I set up the virtual channel, the configuration is invalid and I cannot select the DAQ I/O or channel. 

Any suggestions?

[devchander]

sorry to say that this card PCI 6221 does not support Tratitional DAQ.

It has only DAQmx support.

so you cannot use traditional DAQ virtual channels in this setup