Problem deploying Veristand project to cRIO-9057

[LukeB91]

Hello,

I am using for the first time Veristand and I am encountering a problem in deploying a Veristand project into a cRIO-9057.

In the project I am simply importing an external FMU (I am using the Engine Demo 64.so from NI) and using a Conditional block to generate a digital output (NI cRIO 9474 module is installed with the cRIO).

When I try to deploy the model, the following error is returned by Veristand:

However, if from the System Explorer I disable the NI cRIO 9474 module in the System Definition File, then the project is correctly deployed and the model works fine. So I am thinking that there may be some compatibility issues of the DAQmx drivers, but I cannot figure out why...

I attach the following pictures:

- Project_screen, which is a screenshoot of the project

- cRIO9057_sofware, screenshot of the software packages currently installed on the RT target

The Veristand version I am currently using is the 2023Q4, while the NI DAQmx drivers version installed on the host computer is the 2023Q4 as well.

Thanks to anyone who will try to help!

LukeB

[ZYOng]

Your VeriStand version on the host PC is 2023 Q4, but the VeriStand Engine installed on the cRIO is 20.6