i have a pci 6013 (8 input channel) and pci 6711 (4 outpout channel).Then i need to send a ttl signal to a camera ccd to take a photo when a waveform sinus is equal at zero (rising), but when i send this TTl signal with dasylab using generator pulse or combi trigger and readind this signal, i have difference between dasylab pulse(that is exactly) and measurement pulse that is approximate 40ms after.But i need to have less than 10ms is it possible?
Frequence rate =1000hz and block size=512 the waveform sinus is 0.2Hz.i have already try to increase the sampling rate but nothing happens.Thank for your help.
