How to setup PCMCIA-FBUS software & Hardware

[DDay]

I need help on how to install the PCMCIA-FBUS card and install the software drivers so I can communicate to a FFbus Rosemount Radar using the Rosemount Radar Master software. What Software do I install and run? How do I wire the port to the device? What power source is required and how to wire? Phone support would be helpful.

[Vince Shen]

Connect NI FBUS-PCMCIA card to a fieldbus power hub, connect Rosemount Radar device to power hub. The power supply connected to power hub should be 9~32v DC output.

The NI-FBUS Communications Manager is the drivers of FF communiction and can be downloaded from:

https://www.ni.com/en/support/downloads/software-products/download.ni-fbus-configurator-software.htm...

NI-FBUS Configurator - Communications Manager and Configurator Software

The latest version is 3.2.1. This software package includes both Communications Manager and Configurator. Communications Manager is free. 

Here you can find a document describe the usage of NI-FBUS hardware and software

https://www.ni.com/docs/en-US/bundle/371994h/resource/371994h.pdf

Thanks