Example programs for DSO1000 PnP drivers do not work at all with DSO1022A

[Complex]

Hello Dear Albert

As you mentioned, I install Agillent DSO 1000 folder in wrong path. Now it works correctly.

Thank you very much

[Complex]

Hi Albert

I use the new version that you have uploaded but the captured signal from DSO 1022a, is completely distorted compare with the wave which is show on the DSO screen. What do you think how to get clear figure from DSO?

Best Regards

Masih

[Complex]

Hi Albert

I use the new version that you have uploaded but the captured signal from DSO 1022a, is completely distorted compare with the wave which is show on the DSO screen. What do you think how to get clear figure from DSO?

Best Regards

Masih

[Albert.Geven]

Hi

I did not upload the driver Nathan Tacha did and as from about that day on it could also be found on the NI Website

select http://www.ni.com/devzone/idnet/

or click on the 3th tab of ni.com and in the left row bottom of the first links select Instrument Driver Network

and there type Agilent DSO1022 in the search field

or even better in LabVIEW select Help/Find Instrument Drivers

log in and search for Agilent and DSO1022 and it will be immediately be installed and usable.

[Complex]

Hi Albert

Finally,I can capture data from DSO1022a but you can see on attached images, the wave captured by labview is distorted compare with the real signal the can be observed on the DSO screen.Could you help me how I can to get clear signal?( I also attached the labview file that I used)

[Complex]

Hi Albert

Sorry, At my last post, I couldn't attach my images.

[Perry_S]

Hi Complex,

What channels are you referancing? Can you double check and make sure that you are referancing the same channels.

Perry S.

[Complex]

Hi Albert

I connect my function generator to the channel 1 of "DSO1022a" and in Labview, I select channel 1. On DSO1022a screen I get clear SIN wave but on Labview screen I get distorted SIN wave. One more question, Is it possible to capture data from DSO1022a using  Labview Signal express 2010?

[Perry_S]

Hi Complex,

There is a step in Signal express that allows you to run LabVIEW VIs. You can give that a try. What type of connection do you have for your device? Is it Serial or GPIB?

Perry S.

[Complex]

Hi

it's GPIB.