PXIe-8510/6

[Vladi2021]

Where to find the pinning for LIN PXIe-8510/6.

Thanks

[santo_13]

For PXIe-8510, you need an XNET Transceiver cable to use the port in CAN or LIN mode.

https://www.ni.com/en-us/shop/category/vehicle-communication-buses.html?productId=250801

Since you mentioned LIN, I assume the cable is going to be TRC-8546 and referring the below manual,
https://www.ni.com/docs/en-US/bundle/trc-8546-getting-started/page/overview.html 

[Vladi2021]

thank you Santo, but there is no information here on which contact the LIN is connected to.

[santo_13]

I believe this is what you're looking for, LIN is connected to Pin7 on DB9 connector.

[Vladi2021]

Super! Thank You😁