Error when trying to set up OPC I/O server with LabView 2009

[Terje]

Hi.I get an error when I try to set up OPC I/O server with LabView 2009 and the DSC module. If I open an empty project, right click ”My Computer”. Select new / I/O Server… and then OPC Client, the following error appears: Unable to browse OPC Server from the selected machine.Error -2147467262 occurred at GetOPCServerList.viPossible reason(s):LabVIEW: (Hex 0x80004002) No such interface supported. 

I have tried to repair LabView, but with no luck. Any idea what it could be?

  

[muks]

This should help [broken link removed]

[Terje]

Hi muks and thanks for your reply.

I have actually found that post and already tried that solution.

It didn’t help me 😞

[muks]

You have posted here too. Should we continue there?

[Terje]

These are two separate issuers.

The post you refer to is a problem that I have struggled with for a long time using OPC with DCOM.

This post refers to a problem I got after upgraded to LabView 2009 on one specific computer.

The problems are not related to each other.

[muks]

---

The problems are not related to each other

---

Ok then. Lets try getting this solved. Lemme dig......