I have problems to get information from Arduino GPS Shield to Labview

[RavensFan]

Read Dennis' message again.  Where he said VISA resource going into the NMEA function looked wrong.

You fed a purple wire in and it caused a coercion dot.  Meanwhile, almost all the other functions are working with a pink cluster wire going into the function.

[Dennis_Knutson]

You STILL have not said what it is you are reading. Have you don't any debug on the arduino ade? Is it sending anything at all?

[cesarjr.1991]

I'm getting information from an Arduino GPS shield and it works with NMEA protocol it's beacause i'm using it, idon't know if i'm doing rigth or not, now i don't have problems but it don't read anything, someone can help me? This is the .vi

[RavensFan]

Are you reading any of the messages?

You still haven't tried wiring the pink cluster into the top left of Get GPS Data instead of the purple VISA wire!

[Dennis_Knutson]

Not reading the messages and not answering the
questions is NOT the way to get help. I'm giving up.

[cesarjr.1991]

So sorry, i don't understand what you want to say, i don't understand english so good, i'm doing what i think you say, excuse me. i did it, but i don't have any information from my GPS shield.

[RavensFan]

Now you've fixed the coercion dot on the upper left corner.  Why do you have purple wire where it is now?  You have a coercion dot there.

[cesarjr.1991]

I am connecting the Read buffer from Arduino with Sensor Data from NMEA, i don't know if i'm doing rigth, but i can't get any information 😕

[Dennis_Knutson]

Once last attempt to get you to provide some actual information that might help. Probe the output of the read. Or, right click on the output of it and select Create indicator. Run the VI do there is data in the probe or indicator. Attach an image that shows the content of the probe/indicator. You may In fact be getting data but In the wrong format. Your arduino ade should also show the data that the arduino is sending. Worry about the correct format only once you know that the arduino is actually sending.

[cesarjr.1991]

i've done everything, but i believe i'm not reading anything with arduino block to read, this is the result from Read Buffer