Install Instrument I/O Assistant

[RavensFan]

Any words to go with your title?

I'm going to assume that you are trying to say you don't have the Instrument I/O assistant installed and want to know how to install it.

Have you installed the VISA drivers following your LabVIEW installation.

[zack65]

I installed Labview 2010,when tried to use Instrument I/O Assistant it told me it is not installed correctly,
I installed it and install it again twice because I am getting the same error,I have VISA and NI-488.2 Drivers installed. Thank you

[Scott_A]

Zack,

It sounds like you are following along with the knowledgebase article How Can I Fix an "Instrument I/O Assistant Not Installed Properly" Error? which is good.

Are you trying to install from the driver device CD or from a file that you downloaded from NI.com?

Do you get any errors while uninstalling the instrument I/O Assistant before you try to install it again?

[zack65]

Hi,

Thank you for response, I am trying to install it from a file downloaded from NI.com, I am not getting any errors while I am uninstalling it, but after the installation I am getting that it is not installed correctly I do not know how to get it don. Thank you

[Scott_A]

I would recommend going to to your control panel >> programs and features >> and then right click National Instruments Software and select Uninstall/Change and remove NI-VISA, NI-488.2, and NI Installation I/O Assistant.

Next install NI-VISA (and NI 488.2 if you are using GPIB). There should be an option to install NI Installation I/O Assistant along with it. (I would suggest the 5.0.3 version which is current for LabVIEW 2010 as of March 2011)  This can be found at NI-VISA 5.0.3

If you are unable to install the NI Installation I/O Assistant from the NI-VISA installer then we'll probably have to go to the Device Driver download.

[zack65]

Thank you,it is working now.

[Khoury]

I am trying To write a driver for my signal generator since I could not find that specific driver in Labview search driver. I am thinking to installed instrument I/O assistant for this task. Or do you have better idea. I am very new using labview. can you provide me with the link to install Instrument I/0 assistant

[Esteban_B]

Hi Khoury,

It’s always better to open your own discussion forum in order to provide you better assistance.

In this case you will find in this link more information related to the Instrument I/O Assistance.

I hope this helps!

Regards,

[csimpson]

I have a similiar problem, however, I downloaded LabView straight from NI through my school. I don't have a disk to install the Instrument I/O Assistant. Do you know where else I can download the driver?