NI DAQ compatibility with ARM64

[spongebob6]

Hi! I have been trying to download LabView for a university project. I managed to download just LabView with every extra unticked, and now trying to download individual packages. I downloaded NI-Serial with no issues - again with every extra unticked.

Packages think I need:

NI-DAQmx - use with NI USB-6001

NI-IMAQ - camera

NI-IMAQdx - USB webcam

NI-VISA - use with TCP board

My processor:

64-bit operating system, ARM-based processor, Snapdragon(R) X Plus - X1P42100 - Qualcomm(R) Oryon(TM) CPU (3.24 GHz)

I received this same error for all of the packages. The project is pretty flexible so I am open to suggestions on workarounds or other recommendations.

Thank you for reading, any help hugely appreciated.

The error message:

[GerdW]

Hi Bob,

---

@spongebob6 wrote:

My processor: ARM-based processor, Snapdragon(R) X Plus - X1P42100 

The project is pretty flexible so I am open to suggestions on workarounds or other recommendations.

---

Recommendation: use a different computer with a x64 CPU (Intel, AMD)…

The error message in the image is quite clear on that issue!

[spongebob6]

Hi GerdW, I understand, however, this is the PC that is available to me!

[GerdW]

Hi Bob,

---

@spongebob6 wrote:

I understand, however, this is the PC that is available to me!

---

Then you (or someone else) missed to check the requirements for the project before you (or someone else) decided on the hardware/software to be used.

In your case: the laptop does not fit to the project requirements!

When you need LabVIEW with (lots of NI) hardware support than you should use a computer with a x64 CPU…

[rolfk]

It's even more limited than just the CPU. NI DAQ hardware, do not support any of the USB based DAQ hardware on any system but Windows. That includes your USB-6008. And no, Windows RT or any of the newer Windows for ARM are not a solution, it has to be Windows on an x64 CPU.