NI-DAQmx with Windows7

[Dan@Parker]

What is the oldest version of Measurement and Automation Explorer that can be used with Windows7 32 bit?  My USB-6009 is seen by windows device manager, but MAX 8.6 won't recognize it.  Do I need a later version?

[NIquist]

MAX comes with NI-DAQ.  There is no MAX 8.6, you must mean the DAQ version.  Check these charts for compatibilities:

https://www.ni.com/en/support/documentation/compatibility/16/measurement---automation-explorer--max-...

https://www.ni.com/en/support/documentation/compatibility/16/ni-daqmx-and-labview-compatibility.html

[Dan@Parker]

Thank you for the charts, however I still need to know if this version of Max (4.3) and DAQmx (8.6) will work on Windows7 32bit.  I'm having no luck recognizing my DAQ.  I'm not even seeing it as a DAQmx device in "Devices and Interfaces"

[RavensFan]

Look at National Instruments Product Compatibility for Microsoft Windows 7

[NIquist · Accepted solution]

In this post, Adnan (CLA) says you need to use DAQmx 9.0.2.  Have you tried that, or just the latest version?