building an executable with many layered VIs

[herbie]

Hi rob

Here is the programme.

cheers

herbie

[rsw]

Hi Herbie,

Could you please let me know which VI is your top level one?

Thanks,

[herbie]

Hi Rob

The top level VI called 'X7145 DCX T Case r2.0' is in the folder T case Main.

cheers

Herbie 

[rsw]

Thanks Herbie, just a bit more information I require from you, are you using any specialised user libraries for this that I require to open it? If not then if you could let me know the modules you are using for this VI that'd be great.

Thanks in advance,

Regards,

[herbie]

Hi Rob

The only extra modules used are a SCXI1102C, Daq card and Compumotor Plus drive and linear motor.  The latter is initialized/set-up from the second screen that appears.  So I am assuming that you may not be able to run the programme pass this screen.

cheers

herbie

[BeejalS]

Hi Herbie

I have just taken a look at the file that you attached. There is no project file there. Are you building your application from a project?

In your project file you should have all the sub vi's that you created under 'my computer' not under dependencies when you build your application. This could be why it is not working. I have attached an image showing whare they should be.

Can you attach you actual project file?

Regards

[herbie]

Hi

you are correct the sub vi's are not included in the project tree.  I will try what you have suggested and post the results.

Thank you Herbie

[herbie]

Hi

Please look at the project file and see if it is viable

cheers

Herbie

[BeejalS]

Hi Herbie

I can see that you have created two executables. Are the Level Durability and Durability vi's supposed to be linked in any way? Or are they completely seperate applications?

[herbie]

hi

They are two versions of the same programme. One uses slightly modified versions of certain VI's in the directory. These modifiedc versions also have lever in the title. Hope this answers your question.

Cheers

Herbie