high low signals

[ASU]

Hello forum,

I'm relatively new to labview, however here is my situation. I have a motor driver that can be controlled externally with high (5v amplitude max) and low/ground signals. I'm lookng for a DAQ card with the ability to control 14 signals. Or if there is a better way of controlling I invite all suggestions.

DC

[PBear]

HI ASU,

Thanks for your interest in our products. For DAQ specific questions, I would highly recommend posting on the Multifunction DAQ board, found here. There you will have a much higher response rate to this type of question (hardware).

I would take a look around ni.com/daq for some great references on NI's different hardware options. You'll find many multifunction boards (analog, digital, etc.) that could suit your particular needs.

If you have more questions, feel free to start a thread on the DAQ boards.