how to use DAQcard-1200 in labview7.1 under win2000

[zhzh]

DAQcard-1200 can only use version 6.9.3 of DAQ driver. measurement& automation 2.2 can recognizes the card as device 1, but Labview7.1 cant find it.
thanks a lot.

[Alex_S1]

According to the product information page the DAQcard-1200 actually needs 6.9.1 or earlier. I would first recommend uninstalling 6.9.3 and trying 6.9.1.

The procedure would be to remove the card, remove the driver with add/remove programs, install the 6.9.1 driver located here http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C1293?opendocument&node=132070_US, then reinstall the card.

If you still have problems, let us know what error you get and how you're trying to call it from Labview.

[Chaos]

I think the product pages are in error. The DAQ compatibility chart lists 6.9.3 as the most current...
http://www.ni.com/support/daq/versions_pnp.htm

Also 6.9.3 is shipped with the board itself

Message Edited by Chaos on 04-25-2005 10:57 AM

[Alex_S1]

Thank you for pointing that out I will look into the documentation issue.

How are you attempting to "call" the device from LabVIEW? That is, what VI's are you using? What error message do you get?

[zhzh]

I resolved it under the support of NI.
I can also use max3.0

[Alex_S1]

Alright thanks for reporting the resolution.

[wagada]

I get the same problem !  I use DaqCard-1200 and labview7.1 and ni daq6.9.3 but under windows xp.

The situation is NI DAQ 6.9.3 has recognizes DAQCard-1200 as device 1, but I can't find a vi In labview 7.1 to acquire data from daqcard.

Can you tell me which vi can be used and where is it ?

Thanks a lot !