03-15-2013 01:25 AM
to control rpm of motor through PC ,modbus rtu is being used.what are the basic things need to be concentrated.
03-15-2013 05:22 AM
Hi!
In short:
1) What is modbus? Here's a tutorial: http://www.ni.com/white-paper/7675/en
2) Hardware: What kind of interface is needed by your hardware? Make sure you have all you need.
3) Software: here's a MODBUS Library for Labview: http://zone.ni.com/devzone/cda/epd/p/id/4756
Regards,
Marco
