NI Camera File for Hamamatsu c11440-10C

[haizawa]

Hi, 

I obtained recentlry new camera Hamamatsu C11440-10C (ORCA Flash 2.8) CMOS camera and tried to connect it to frame grabber NI pcie-1433 on 64 bit version of Windows 7. Unfortunately I was stacked when I checked the connectivity between them, since Camera File was not available for this camera yet. I found that NI Camera file generator could be used to generate camera file specific to C11440-10C, but I could not make it work due to the unavailability of the values for the parameters which needs to be filled. 

I wonder if I could apply the camera file which was designed for the other cameras to C11440-10C as well. Ideally, I hope I can adjust the representative parameters such as frame rate, frame size (width, heigh in pixels), RTSI, binning, resolution in bits and acquisition grain.

http://www.hamamatsu.com/eu/en/C11440-10C.html

Best, 

Hidenori

[W.Muhammad]

Hello Mr.. Haizawa

Actually Camera file is better if being provided by the Camera makers, NI Camera File generator can be used to create a Camera file, according to the parameters provided. National Instruments,however,does not ensure the operation of the camera based on this camera file.

I hope this document will help.

http://digital.ni.com/public.nsf/allkb/E16D3364AD5D8C1C862576160075AF93?OpenDocument

best regards,

[haizawa]

Hi Mr. Muhammad, 

Thanks for the response. As you kindly suggested, I obtained the camera file for this camera from vendor, Hamamatsu. Unfortunately, This camera file as such does not works with PCIE-1433 but with other previous frame grabbers. I will try to modify this camera file further. Specification of the frame grabber provided by the link should help.

Best, 

[W.Muhammad]

Dear Mr.haizawa

Thanks for the response.

please let us know your progress in this regard,how things work in future.

Best of luck for your application.

[imran12]

i need the camera file for hammatsu camera c-1140-22u.  i tried to generate using ni camera file generate but it does not work . i contacted to hamamatsu but they have not replied. i am using pxie 1435 frame grabber card.