CONNECTING 80 CHANNELS WITH PCI 6255

[ASIM_BHATTI]

HELLO

I want to connect all 80 single ended inputs with PCI 6255 DAQ. Is the two connector blocks recommended by NI (SCC-68 for connector 0 and SCB-68 for connector 1) are enough for connecting all 80 channels or i have to use some extra connector blocks?

[devchander]

It is enough

But, do buy the respective Connecting Cables, along with the connector blocks 

[Nathan]

Greetings Asim,

To elaborate further on devchander's comment, there are specific cables to be used for Connector 0 and Connector 1, namely the SHC68-68-EPM and the SHC68-68 respectively. As for the screw terminal connector blocks, you can use the SCC-68 or SCB-68 for Connector 0, and we only recommend the SCB-68 for Connector 1. 

Please let us know if you have any further questions and/or have any feedback on our products. Hope this helps.

Best regards,

Nathan Yang | Data Acquisition Product Manager | National Instruments