Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Calibration Executive

Why do the specifications differ between the Cal Exec calibration reports and the specs on NI's website? How where the calibration executive specifications determined?

0 Kudos
Message 1 of 5
(3,410 Views)

Hello,

 

I can not look into this without knowing the following:

 

1.) What product are you using?

2.) Which specification isn't matching up and the calibration procedure that isn't working properly?

3.) What information are you comparing? Could you provide the documents that you are comparing?


Jim St
National Instruments
RF Product Support Engineer
0 Kudos
Message 2 of 5
(3,404 Views)

Do you know if NI has warranted specifictions for the Digitizer cards? For example, the PXI-5154 has 'typical' for the RMS noise, Rise/Fall Time, and Crosstalk specifications on the spec sheet. Are there warranted specifications anywhere?

 

Thanks

 

0 Kudos
Message 3 of 5
(3,276 Views)

There aren't any warranted specifications available for our typical specs on digitizers.  It must be listed as warranted in the manual.

 

Jon S

Applications Engineer
National Instruments
0 Kudos
Message 4 of 5
(3,207 Views)

Jim,

 

Thanks for the response, however after looking at the specifications it seems that the calibraiton executive specifications are always tighter than the NI spec sheet, so even though they don't match we are okay as long as they are tighter specs.  Thanks

0 Kudos
Message 5 of 5
(3,203 Views)