DAQ damage

[labview1958]

I have a computer with a DAQ 6025E installed. How do I check for damage in the DAQ 6025E card? How do I know that it is damage free? If damage, can it be repaired?

[JoeSavage]

Run the online diagnostic program at http://www.ni.com/support/selftest/
This test is thorough enough to give you a good indication of whether the board is working or not.

Joe

[labview1958]

Internet access from my workplace is difficult. I am not allowed to take the computer elsewhere. Can I run the DAQ test wiyhout usung the internet?

[AnujD]

Try this VI out.

Hope this helps!!

[labview1958]

My computer display has gone from 256 color to 16 color. I have sent for it repairs. Since it cannot go to 256 color my labview programs cannot run. The technician tells me that there is a virus. He might have to reformat. How can I reinstall my DAQ 6025E card. I am not able to find the necessarry CD.

[scraggs99]

That device is still supported with National Instruments Traditional NI-DAQ driver. You can download the driver. The only bad thing is that the files are really big. I would recommend downloading it once and burning it to a disc for later.

Here is the URL where you can download the files.

http://digital.ni.com/softlib.nsf/websearch/BEC182021CEB566C86256EEE00696562?opendocument&node=132060_US

[AnujD]

You can download any of our DAQ drivers from http://www.ni.com/support/daq/versions.htm.

I would also suggest using NI-DAQmx instead of Traditional NI-DAQ.

Regards,
Anuj D.

[labview1958]

Many VI are nissing from your code. For example callibration"e"series.vi is missing. Others are AOwaveform, AIwaveform.VI etc. How to test?

[AnujD]

The VIs used come with a DAQ driver. You may need to update your DAQ driver installation and ensure you do a full install.

Regards,
Anuj D.

[labview1958]

My DAQ 6025E card was installed in 2002 in labview 6.0. If I install labview 7.0, will that be show all the missing VI? Should I buy a NEW DAQ 6025E card? HOW?