Need NI Card for Simulink

[Headshot]

Hello,

For controlling a slow system, I have to read in 2 analog Signals and also get out 2 analog signals. The signal range must be up to 10 V. The card also must have an USB port and should be programmed with MATLAB Simulink.

I think the NI-USB 6008, 6009 or 6211 should work, but I read posts from users having problems. Could someone give me a positive feedback, before I buy a card?

Thanks

[RamonaL]

Hi There,

you can use any hardware which is supported by the drivers here:

http://www.mathworks.com/products/daq/supportedio14005.html

So generally any of the cards you mentioned should work.

Hope this helps, RMathews