Taking data using analog input at 40ms interval

[ultrateenz]

How do I take in all 3 analog input together at 40ms interval.

Example: programme will run and programme will take in input, stop and take in input again at 40ms interval.

[Dennis_Knutson]

You can set the sample clock to do this or put your acquisition code inside a while loop.

If you want some example code, you'd better provide the programming language you are using.

[ultrateenz]

This is a print screen of my programme

[Dennis_Knutson]

You could instead post your actual VI. It's hard to see how you have the timing function wired, etc. It looks like you are sampling at 60000 samples/sec. I'm not sure, but I think you have it set up to acquire all of these so you will take 1 sec for each acquisition.

Message Edited by Dennis Knutson on 06-16-2009 08:26 AM