what device to connect SH 1006868

[hardware problem]

Hi, we bougth 3 PCI cards from National Instrument.
We use PCI 6031 E and we bougth a cable called SH1006868...This cable connects to 100 pin E series devices and ends with 2 female 68 pin 0.050 series type D connector. Then we would like to connect these cable to my device but I don't know where I can find a male 68 pin 0.050 series D type connector. Following that, my idea is then to find a connector which can be assembly to SH1006868.

ps: I am french then sorry for my english...it is emergency then thank you for your help!!

[Russell]

Hello,

Typically, the solution is to use one of our terminal blocks which do have the male 68-pin connector you are referring to. There are several options including the SCB-68 Shielded Terminal Block and the CB-68LP low cost terminal accessory.

If your application requires interfacing to a custom system, you may need just the male 68-pin board mount connector. If this is the case, we have a very good Knowledge Base article that lists part numbers and manufacturers for most of our connectors. See Specifications and Manufacturers
for Board Mating Connectors.

I hope this helps!

Russell
Applications Engineer
National Instruments
http://www.ni.com/support