回复： Re: 回复： Re: Create Property Node

[ThomasYoung]

我在一个VI中，同一个控件要用许多Property Node，Reference，Local Variable，一个一个Create好麻烦，又慢，可是又不能Ctrl+C—Ctrl+V，有没有比较省事儿的方法可以快一点创建出Property Node（或Reference和Local Variable）？

谢谢！

帖子被ThomasYoung在 01-26-2010 01:53 AM

时编辑过了

[ian_fung · Accepted solution]

Assuming that you have created a property node (of the control)... 

1. Highlight the property node with a mouse click i.e. the property node should be highlighted with dashed-line (see image 1)
2. Now, depress [Ctrl] key and holds it.
3. With mouse, click on the property node and drag.
4. You have just created a copy of the property node, reference or even local variables 🙂

image 1

Message Edited by ian fung on 01-26-2010 04:02 PM

[ThomasYoung]

哇，哇哇，太好了，太谢谢你了！！

[ian_fung]

There are more you can do with [Ctrl]+[mouse click & drag]

i.e. If you realize that you need more room within a Case/ Loop or anywhere in the Block Diagram, you may, depress the [CTRL] key, carefully choose the "expand from" location, mouse-click & drag.

This will create more room in a congested block diagram 😉

 before [ctrl]+[click & drag]

  after [ctrl]+[click & drag]

[ThomasYoung]

LabView中是不是有许多快捷键？可不可以讲讲呢？可以加快编程速度。

[ian_fung]

的确是有很多... 其实一时间也说不上来. 倒是您提问了而我也知道并经常使用这些快捷键才能"对答如流";)

也许是因为自LabVIEW5.1开始使用LabVIEW, 有许多所谓的Advanced Tools/ Express VIs, 我都不常用. 尤其是 Automatic Tool Selection, Place Front Panel Terminals As Icons, Automatic Wire Routing etc. 这些功能, 对我而言, 只会把图框弄得更乱!

I do not use "Automatic Tool Selection" but using "tab" to change to the tool that I want.

I do not use "Automatic Wire Routing" because it is horrible 😉 I am concern about neat "wiring" 😛

I do not "Place Front Panel Terminals As Icons" because it is block-diagram-space-consuming 🙂

And many many more... 

也许, 有时间的话, 我能逐个写出来... 放到我的网站吧!

[ian_fung]

其实, 上面两个[CTRL]+[Mouse CLICK & DRAG]的快捷键已经能让您编程愉快!

[ThomasYoung]

期待...

若是哪天写好了，可否告知在下？

再次感谢！

[ian_fung]

当然! 当然! 😉 

[ThomasYoung]

你的网站的网址是什么？