Configuring PXI remote system with cDAQ

[gmonjo]

Hi,

I'm having some trouble configuring a PXI-8184 that reads from a cDAQ-9188 chasis (using MAX).

I see the PXI-8184 on my Remote System and I see the cDAQ-9188 on My System->Devices and Interfases->Network devices. The thing is that I want to see the cDAQ-9188 on the Network devices of my Remote System, since the RT target will be running alone. I'm not able to add a Network Device->VISA TCP/IP Resource, using Auto-detect of LAN Instrument or Manual Entry of LAN Instruments.

All devices (cDAQ and PXI) are connected to the host computer via a Router, using Static IP Address on the same network.

I want to say that it's my first time using PXI and Real-Time Development Option, so maybe I'm looking at it the wrong way.

The cDAQ-9188 chassis has four NI-9236 acquiring several strain gages.

I would appreciate your help.

Regards.

Gustavo

[Mauro Vera]

Good morning, Gustavo,

Here a few books with some procedures to configure. Any questions please contact us.

NI cDAQ-9181 Ethernet Chassis Quick Start

https://www.ni.com/docs/en-US/bundle/cdaq-9181-getting-started/resource/373275b.pdf

NI PXI-8184/8185 User Manual and Specifications

https://www.ni.com/docs/en-US/bundle/370836b/resource/370836b.pdf

Sincerely,

[gmonjo]

Thank you Mauro. However I found out that cDAQ device is not compatible with the RT OS.

http://zone.ni.com/devzone/cda/tut/p/id/6913 

https://www.ni.com/en/support/documentation/compatibility/09/software-support-for-compactrio--compac...

Regards.