Hello, I am using a PXI-5105 in a PXI-1033 chassis.
When trying to acquire data in NI-Scope, there is a timeout error status code -228858 (see attached picture).
The attachment to the PC is with a NI PCIe-8361 card. I have tried a different computer and different PCIe-8361 and the results are the same. I have also tried different slots on the PXI-1033 chassis. Unfortunately there is not another chassis I can try.
The self test in NI-MAX passes nearly instantaneously, but the self calibration never finishes (the red link light on the PXI-1033 blinks forever). If I try the self calibration, I need to put the PXI-1033 into standby to stop it or even shut down the computer.
On one computer I can sometimes acquire a very small amount of data (10 ns or so), but even then it sometimes fails.
Any suggestions?
