pressure transducer question

[kevinsu1126]

Hi guys, does any of you have seen this kind of pressure transducer? (See the attachment) 

Mine was broken because one of the leads were completely fell off. So, I need to find a new one, but I can't find the part number. 

P.S All I can read on the transducer are some random words and numbers. Here is what I see if I place the opening toward the front. 

On the left side: 6ff8g; 201020n. On the back: Micro. On the right, blank. 

THANK YOU GUYS!!!!!! 

[nyc_(is_out_of_here)]

---

@kevinsu1126 wrote:

Hi guys, does any of you have seen this kind of pressure transducer? (See the attachment) 

Mine was broken because one of the leads were completely fell off. So, I need to find a new one, but I can't find the part number. 

P.S All I can read on the transducer are some random words and numbers. Here is what I see if I place the opening toward the front. 

On the left side: 6ff8g; 201020n. On the back: Micro. On the right, blank. 

THANK YOU GUYS!!!!!! 

---

Is it a NI product?

[kevinsu1126]

I guess so. 

[Dennis_Knutson]

NI does not make transducers. No one ever created a BOM? What about purchase order records? What sort of test are you doing? From the requirements, you should be able to find a replacement.

[SnowMule]

See those markings on the side? Try punching those into your search engine of choice.

[Buechsenschuetz]

You should also look for someone to solder the leads properly. The solder points look awful. 

[giovanni_t]

Never seen transducers made by NI.