Driver for Metex M-3890

[bernddoe]

The Metex M-3890 uses an USB interface via the HID.dll. I can include the HID.DLL into my code, but I dont't have a documentation for the function calls and parameters.

Any help is appriciated. Thanks

Bernd

[Christian_L]

Please post your question in the Instrument Connectivity section of the discussion forum, or you may want to post it on the Bulleting Board of the Metex website.

[perisset]

Hi

The support from Metex is very low. On the web page it is not possible to have any information for the command dialog that is needed for this Metex Multimeter M-3890DT with USB Port.
Have someone more details?

[Chris_K_]

I cannot find any documentation about this driver, so I would suggest contacting Metex.  They should be able to provide this information.  Also as Christian mentioned, if you post your question on the Instrument Control portion of the forums you may find more information.

Chris_K

[omlex]

The following posting described the structure of a HID report of the DMM M-3890DT.

If you have any success with this, I'd be interested in the driver too.

Best.

http://forum.gsi.de/index.php?t=tree&th=1024&start=0&rid=0&S=6b61b7d8edab1a7adcbba6a606cb2e45