Connectin' FBG Interrogator via Ethernet to Labview

[TITAN-x]

Already had conversation with Micronoptics and didn't get a helpful answer. The device I have is si255 interrogator. On the other hand, I already went through the examples send to me regarding using the instrument via labview was without block diagram. So I see nothing regarding programming. 

[AnalogKid2DigitalMan]

Manual looks fairly complete with commands, even has a basic LabVIEW implementation shown using TCP/IP:

http://www.micronoptics.com/download/manual-pdf/#

-AK2DM

[TITAN-x]

I have fully analized this manual but unfortunately it doesn't consist of my device. But still I went through the similar steps as shown in the manual but unfortunately didnt work.

I just would like to ask. Did anyone of you have a chance to work with interrogator along with labview?

[AnalogKid2DigitalMan]

Sorry, posted wrong manual, the 255 manual has even better LabVIEW material. The is a API with source code for LabVIEW. I have not worked witht the Interrogate but have used other Micron instruments.

http://www.micronoptics.com/product/optical-sensing-instrument-si255/

-AK2DM

[TITAN-x]

If we are talking about same source code, the block diagram is locked and invisible. If you are talking about another one, can you kindly share with me?

[AnalogKid2DigitalMan]

See Section 5.4 of the 2nd manual I linked to.

-AK2DM

[TITAN-x]

I didnt see that one previously. Will check and inform you by tomorrow about the result. Thank you so much for your help!