NI 9263

[glskinner84]

Is there a way to programmically change the resolution of an analog out to a lower limit? The 9263 is +-10, 16bit. I'd like to alter this so I can decrease my voltage limits, thus getting a better resolution. 

[Alexander_Sobolev]

Not according to the specs, it has only one range

https://www.ni.com/docs/en-US/bundle/ni-9263-specs/page/specs.html

[glskinner84]

Could I setup two channels? One with a hardware voltage divder and one without. I could then tell labview to use one channel at certain voltage levels?

[glskinner84]

Is there any Analog Out device that NI has that can output voltages from 10mV to 20V? The 9263 only has a 0.05V minimum 

[GerdW]

Hi skinner,

Is there any Analog Out device that NI has that can output voltages from 10mV to 20V?

Well, the NI9263 is capable to do so. With an accuracy of 14mV as stated in the specifications…

The 9263 only has a 0.05V minimum 

Really? Where does it say so?

Couldn't find that in the specs…

[GerdW]

Is there any Analog Out device that NI has that can output voltages from 10mV to 20V?

Well, the NI9263 is capable to do so. With an accuracy of 14mV as stated in the specifications…

The 9263 only has a 0.05V minimum 

Really? Where does it say so?

Couldn't find that in the specs…

[glskinner84]

Yea, that was my mistake. The 9263 will work for my application.