Create a Desktop Real-Time Computer Running Pharlap?

[hsinhsiang]

I try to create RT(Pharlap)...follow below steps https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019LZiSAM&l=en-US No matter which method I choose...format can't success.. Can help explain the reason??

[scotia673]

The screenshot you included is just a warning that when you format the device with a new file system, you will erase any existing data on the drive. Can you clarify what part of the formatting process isn't working? 

[hsinhsiang]

hi...you can see I typed (y) then reply "Not formatting hard driver."

[scotia673]

Ah, I missed that. Is your hardware setup supported according to this list?

[hsinhsiang]

I tested my pc that pass all condition....

I can use safe mode to install software by USB boot(select 2)...

And I can usb boot select 1...All functions can work correct...
If I use this method...would be always boot from usb(select 1)..

I think the Pharlap not support SSD HD ???

[tic.not.tock]

---

@hsinhsiang wrote:

I think the Pharlap not support SSD HD ???

---

The SSD should not be a problem. For example, the PXIe 8880 has an SSD hard drive and can be purchased with Phar Lap.

[hsinhsiang]

so..Which step might be wrong?

or give me some advice....thx!!

[tic.not.tock · Accepted solution]

Hey hsinhsiang,

Have you tried typing "yes" instead of "y"? You may have a BIOS that does not accept "y" as "yes", so the utilities default to not formatting the hard drive. I found some internal documentation that pointed to this as a possible cause.

[hsinhsiang]

I make a fool of myself.....
It just types "yes" would be OK..

[Claiudiu]

Hi, same problem I had, I had to type yes not "y" and it worked. but now I get error couldn't find C:\phexec.exe. Did you get this or were you able to run Pharlap from your SSD/HDD?