Digital I/O

Start a topic

Show: - -

My program uses digital i/o port to write four lines separately, and when another program is running, my program goes extremely slow. Why?

by on Latest post on by

3 Replies 3818 Views

0 Kudos

3 Replies

4New

simultaneous digital i/o with a dio-32hs

by on Latest post on by

1 Reply 3411 Views

0 Kudos

1 Reply

2New

Configure PCI-DIO-32HS card

by on Latest post on by

1 Reply 3518 Views

0 Kudos

1 Reply

2New

Can I use the output of the PC-TIO card to drive 5V into a 50 ohm load?

by on Latest post on by

1 Reply 3492 Views

1 Kudo

1 Reply

2New

Why are my digital ports always displaying a high state in example vi's and in MAX(red led lights up)?

by on Latest post on by

1 Reply 3512 Views

0 Kudos

1 Reply

2New

for NI-6534 PCI, does the internal clock send one 8-bit word, for one port, at the clock's Hi to Lo transition, Lo-hi, any at transition at all or neither?

by on Latest post on by

1 Reply 3488 Views

0 Kudos

1 Reply

2New

What is a 182097-01 board?

by on Latest post on by

1 Reply 3977 Views

0 Kudos

1 Reply

2New

non-repetitive Pattern generation PCI-6534, LABVIEW 6.0, no trigger, no handshake, serial bit stream output to one LINE, each bit outputed with board's internal clock

by on Latest post on by

1 Reply 3501 Views

0 Kudos

1 Reply

2New

non-repetive Pattern generation PCI-6534,LABVIEW 6.0, no trigger, no handshake, serial bit stream output to one channel, each bit outputed with board's internal clock

by on Latest post on by

1 Reply 3733 Views

0 Kudos

1 Reply

2New

how to do continuous pattern output from buffer

by on Latest post on by

2 Replies 3819 Views

0 Kudos

2 Replies

3New

"Buffered Pattern Output Vi", If I call DIO config and DIO write, how do I configure these so that they know to output to a single, specified line (ex., DIOAO) and how do I give to WRITE the appropriate array, each element of which is "1" or "O"?

by on Latest post on by

1 Reply 3467 Views

0 Kudos

1 Reply

2New

group writing to 6508

by on Latest post on by

2 Replies 3777 Views

2 Kudos

2 Replies

3New

Why does my NIDAQ application behave correctly on a P233 WinNT 4.0sp6 system and incorrectly on a P3-600 Win NT 4.0sp6?

by on Latest post on by

3 Replies 3787 Views

1 Kudo

3 Replies

4New

How do I locate the base addresses of the 2 PC-DIO-24pnp boards I've installed?

by on Latest post on by

1 Reply 3497 Views

0 Kudos

1 Reply

2New

I am using a PCI 6534 for pattern output. I only seem to be able to trigger a pattern many times if I rewrite the buffer each time.However I want to write to the buffer once and then output a pattern whenever I trigger the card.

by on Latest post on by

2 Replies 3810 Views

0 Kudos

2 Replies

3New

Signal distortion when using NI Scope 5122 with Mux. Switch 2503 2-wire config. to adquire a signal of 16 impulses. Any recomendations?

by on Latest post on by

1 Reply 3636 Views

1 Kudo

1 Reply

2New

How do I create an interrupt on the PCI-DIO-96 from an external signal connected to the lines PC0 or PC3 of a port?

by on Latest post on by

1 Reply 3844 Views

0 Kudos

1 Reply

2New

Why does my PCI6534 keep missing triggers?

by on Latest post on by

1 Reply 3615 Views

0 Kudos

1 Reply

2New

Please recommend IO Mapped Digital IO Card

by on Latest post on by

1 Reply 3693 Views

0 Kudos

1 Reply

2New

Problem with the Continious Pattern Input VI (from the 653x library) running on a PCI DIO 6534 card.

by on Latest post on by

1 Reply 3687 Views

0 Kudos

1 Reply

2New

How to avoid underFlowError error (code 10843)?

by on Latest post on by

1 Reply 3612 Views

0 Kudos

1 Reply

2New

Generating and aquiring 1.8V signals from NI Digital I/O boards

by on Latest post on by

1 Reply 3734 Views

0 Kudos

1 Reply

2New

What value(s) (using [putvalue('nidaq',value)]) need to be sent to the ER-8 to open and close individual relays?

by on Latest post on by

1 Reply 3623 Views

0 Kudos

1 Reply

2New

Digital IO with DAQCard 1200

by on Latest post on by

1 Reply 3736 Views

0 Kudos

1 Reply

2New

How to use a PCI-DIO-32HS board with macintosh C++

by on Latest post on by

1 Reply 3730 Views

0 Kudos

1 Reply

2New

I am using LV5.1 and a DAQ-card Computerboards "CIO-DO96H" (DO-card) since years.

by on Latest post on by

1 Reply 3605 Views

0 Kudos

1 Reply

2New

How many PC-DIO-32HS can we plug inside a PC that supports one network board. Is it just a question of number of PCI SLOTS

by on Latest post on by

1 Reply 3588 Views

0 Kudos

1 Reply

2New

How do I output a hexadecimal string to equipment using the Visa Write function

by on Latest post on by

2 Replies 4127 Views

1 Kudo

2 Replies

3New

How come MAX 2.0 can only detect one PCI NI-IMAQ 1422 board on the PC104 plus stack?

by on Latest post on by

1 Reply 3670 Views

0 Kudos

1 Reply

2New

Digital I/O

NI-9482 leaks AC when the relay is in the open position.

Issue with +5v pins on USB-6501

5V input drops to 1.5V

NI-9403の2チャンネルを使った差動TTL回路

NI9401 unable to read digital pulses generated by encoder in FPGA programming mode

My program uses digital i/o port to write four lines separately, and when another program is running, my program goes extremely slow. Why?

simultaneous digital i/o with a dio-32hs

Configure PCI-DIO-32HS card

Can I use the output of the PC-TIO card to drive 5V into a 50 ohm load?

Why are my digital ports always displaying a high state in example vi's and in MAX(red led lights up)?

for NI-6534 PCI, does the internal clock send one 8-bit word, for one port, at the clock's Hi to Lo transition, Lo-hi, any at transition at all or neither?

What is a 182097-01 board?

non-repetitive Pattern generation PCI-6534, LABVIEW 6.0, no trigger, no handshake, serial bit stream output to one LINE, each bit outputed with board's internal clock

non-repetive Pattern generation PCI-6534,LABVIEW 6.0, no trigger, no handshake, serial bit stream output to one channel, each bit outputed with board's internal clock

how to do continuous pattern output from buffer

"Buffered Pattern Output Vi", If I call DIO config and DIO write, how do I configure these so that they know to output to a single, specified line (ex., DIOAO) and how do I give to WRITE the appropriate array, each element of which is "1" or "O"?

group writing to 6508

Why does my NIDAQ application behave correctly on a P233 WinNT 4.0sp6 system and incorrectly on a P3-600 Win NT 4.0sp6?

How do I locate the base addresses of the 2 PC-DIO-24pnp boards I've installed?

I am using a PCI 6534 for pattern output. I only seem to be able to trigger a pattern many times if I rewrite the buffer each time.However I want to write to the buffer once and then output a pattern whenever I trigger the card.

Signal distortion when using NI Scope 5122 with Mux. Switch 2503 2-wire config. to adquire a signal of 16 impulses. Any recomendations?

How do I create an interrupt on the PCI-DIO-96 from an external signal connected to the lines PC0 or PC3 of a port?

Why does my PCI6534 keep missing triggers?

Please recommend IO Mapped Digital IO Card

Problem with the Continious Pattern Input VI (from the 653x library) running on a PCI DIO 6534 card.

How to avoid underFlowError error (code 10843)?

Generating and aquiring 1.8V signals from NI Digital I/O boards

What value(s) (using [putvalue('nidaq',value)]) need to be sent to the ER-8 to open and close individual relays?

Digital IO with DAQCard 1200

How to use a PCI-DIO-32HS board with macintosh C++

I am using LV5.1 and a DAQ-card Computerboards "CIO-DO96H" (DO-card) since years.

How many PC-DIO-32HS can we plug inside a PC that supports one network board. Is it just a question of number of PCI SLOTS

How do I output a hexadecimal string to equipment using the Visa Write function

How come MAX 2.0 can only detect one PCI NI-IMAQ 1422 board on the PC104 plus stack?

How do I output a hexadecimal string to equipment using the Visa Write function?